Features:
Brand:YIBOYUAN
100% Brand New and High Quality Universal Battery Charger with USB Output
2 IN 1 USB Battery Charger. It can be used as not only a special charger, but also a charging plug for your device.
Automatic constant current control prevents battery from overcharging.
Smart LED indicator shows charging status: Pink/Purple shows that it is charging. Blue shows that it is charged fully.
When the battery is fully charged,automatically stop charging.
Safety cut out circuit,Built-in protection circuit prevents overcharging.
Constant current,constant voltage charging,automatic identification.
Also convenient to interchange your spare batteries
Use the data line which corresponds to mobile phone can be charged directly to the phone.
Intelligent Chip: The smart chip protects from short circuit and overload by regulating voltage an ensuring a high effeciency charge.
Technical Specifications:
Input: AC 100-240V 50/60Hz 150mA
Output: DC 4.35V 600mA +/-50mA,USB Port
Output: DC5.2V, 1000mA(USB)
Connecter: US Plug
Short circuit and overload protection
Color: Black
Note: This Charger Just Fit For The Battery (32mm<=width<=70mm)
Compatible with
Universal Wall Travel Charger for Cell Phone PDA Camera Li-ion Battery with USB Port Black
Mobile phones
Digital cameras
Mp3 Mp4 players
Hand held gaming devices
PDAs
Acer, Asus, Audiovox, BlackBerry, Casio, CECT, Dell, Dopod, Garmin, Handspring, Hitachi, HP, Compaq, HTC, i-mate, Kyocera, LG, MiTAC, Motorola, NEC, Nokia, O2 Xda, Palm, Panasonic, Pantech, Samsung, Sanyo, Sharp, Siemens, Sony Ericsson, T-Mobile Sidekick, Toshiba, UTStarcom
...and many more rechargeable lithium-ion batteries at 3.8 volts
How to use the Onite Universal charger?
First, please take a look at your battery; there are one mark "+" positive contact and one mark "-" negative contact.
Then, take a look on the Onite charger; you can get two little movable prongs. As the positive and negative are automatically recognized by this charger, it doesn''t matter which contact on positive and which contact negative.
Third, Pull down the bottom, and put the battery in it. Adjust the charger prongs to match the polarities of the contacts on the battery. Release the part of the charger that moves. This will lock the battery in place. When the light on the charger turn on to blue, it means they are prepared to be charged.
Finally, plug the charger into the wall, the light becomes pink/purple, which indicates the battery charging. When the light turns to blue again, that indicates the battery is fully charged.
Note:
The Onite Charger is suitable only for batteries with terminals on the top or bottom. It is not suitable for batteries with terminals on the front or back
Package include:
1x Universal Battery Charger with USB Output
Note:
1. Don not plug the charger into the wall outlet yet.
2. Align YIBOYUAN''s Connect pins with the contacts on your battery.
3. For batteries with more than 2 contact points, start with the two outer contacts(left most and right most contacts).
4. Now slide your battery into YIBOYUAN''s pins.Make sure YIBOYUAN''s contact pins are touching the contacts on your battery.
5. "LED" light indicates good connection,you have setup the charger correctly for this battery.
6. If the "LED" lights does not indicate good connection,slide to another battery connection.(not all batteries will work,this charges approx 90% all digital camera,cell phone and other msic batteries)
7. Now plug the universal battery only charger into a wall outlet.
8.Totally dead batteries will not be seen or charged
Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within one business days. Inappropriate reviews will not be posted.
Have any question or inquire for this item? Please contact Customer Service. (Our customer representative will get back shortly.)