Descriptions:
This high quality WiFi Repeater, also called a range extender is used to broaden range of your WiFi network.
A WiFi repeater works by receiving the WiFi signal from a router and then amplifying and re-broadcasting it around locally.
With a WiFi repeater, computers and printers that are located out of the original range of the access point can access the extended wifi network.
The WiFi repeater effectively doubles the coverage area of your existing WiFi network, extend your network to the far end of your home or office,
you just need to place it half way between the computers and router.
Improves wireless coverage in all WLAN networks
WLAN 802.11n for wireless high-speed access
Downward compatible with 802.11g (54Mbit/s) and 802.11b standard (11Mbit/s)
Support 2.4GHz WLAN networks
Maximum WLAN security with WPA2, WPA and WEP (128/64)
Software wizard for simple setup
Antennas integrated
Frequency Range: 2.4-2.4835GHz
Supports Repeater and AP Mode
Software wizard for simple setup
Wireless Auto-Channel selection
Supports WiFi Protection Setup (WPS)
Supports WEP, TKIP and AES Encryption
Provides up to 300Mbps transmission rates
Newest Win 8 Style Configuration Interface
WLAN 802.11n for wireless high-speed access
Strongest Airgain + Metal onboard PCBA Antenna
Supports configuration file backup and restore
Improves wireless coverage in all WLAN networks
Supports the various WiFi shared the longer range
Maximum WLAN security with WPA2, WPA and WEP(128/ 64)
The WPS function ease your life and ensure the safety of your network
Downward compatible with 802.11g (54Mbit/s) and 802.11b standard (11Mbit/s)
Additional WPS button(Wi-Fi Protected Setup) makes it more convenient to encrypt wireless network data transmission, and to prevent
Specification:
WLAN access point/client according to IEEE 802.11n, g, b
110-230 volt socket
The WLAN client must support at least the WPA encryption standard
WLAN access point and the WLAN client with automatic IP address assignment(DHCP)
Forwarding of IPv4-based protocols/Address Resolution Protocol
The network name (SSID) of the WLAN access point must be set to "visible"
For iPhone/iPad, Smart Phone USER:
Turn off your iPhone''s and laptop''s wireless completely.
There is a small reset button on your repeater. Press it and keep it pressed 10 seconds.
Have patience here and watch its lights go off and then on. Let it alone 2-5 minutes.
Turn on WiFi and search for wireless network named "Wifi Repeater".
Connect to it regardless of not having internet connection yet.
Open safari
Type in the address bar this: 192.168.10.1/home.asp
It will ask you username and password
The username : admin
The password : admin
This is the Wifi Repeater''s little setup software.
Click on Setup Wizard.
Choose Wireless Repeater Mode then click next
Then you will see a list of wireless networks which yours will be there
e.g SKYXXXXX.
Press "Select" on your SKYXXXXX.
It will ask for your wireless network password. Add it.
Save and reboot.
Now, hopefully if all went smooth, now you will have a single wireless signal, but stronger in other room. Note that the Wifi Repeater name will disappear and you will see only SKYXXXXX in your house.
If you fail, just repeat from the step where you reset the Wifi Repeater from button - to factory defaults.
Package include:
1 x 300mbps WiFi Repeater
1 x RJ45 Cable
1 x User Manual
Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within one business days. Inappropriate reviews will not be posted.
Have any question or inquire for this item? Please contact Customer Service. (Our customer representative will get back shortly.)